Causes And Solutions For Low Water Pressure In Your Home

Are you getting tired of the low and inconsistent water pressure your well is providing to the faucets in your home? If so, you can hire a plumber to come and fix this problem. The first step the plumber will take is to locate the cause of the low pressure. After that, the plumber may be able to offer one or more solutions to fix the problem.

Common Causes of Low Water Pressure

With city water systems, the water pressure is usually fairly consistent and good, but well water can have pressure that is lower than it should be. There are several reasons this can occur, but it is not always because of the well pump you have in your home.

The first cause of low water pressure is clogged pipes. Old pipes tend to accumulate debris over the years, and this debris restricts the flow of water. It can be hard for a plumber to determine if this is the reason the water pressure is low though because it involves getting inside the pipes to take a look.

The second cause of low water pressure is due to the water pump that pumps the water from the well. Most water pumps have pressure gauges on them, and these gauges will show you the pressure of the water. The pressure should be around 45 to 55 psi (pounds per square inch).

Another reason you may have poor water pressure could be due to distance. If your water pressure is fine in your kitchen, but poor in your upstairs bathroom, it is likely because of the distance the water must travel to reach the upstairs. As water travels through pipes, it naturally loses pressure. The farther it must travel, the more pressure it will lose.

The plumber may also want to check the types of faucets and shower nozzles you have. If these devices are clogged, this could also be the reason you do not have enough pressure.

Ways to Fix this Problem

If the reason your water pressure is low is due to old, clogged pipes, your plumber may recommend replacing some of them. This is a huge job, especially if there are a lot of pipes that need to be replaced. Replacing some of the shower nozzles or faucets could also help solve the problem if any of them are clogged.

Another solution for this problem is to simply adjust the pressure gauge on the water pump, but this is only possible if the pump has an adjustable switch. There is also a chance that the well you have is running short of water. When this happens, it becomes harder for the pump to pump water into a house.

If none of these solutions are right for your home, or if none of them work, your plumber may suggest installing a pressure booster. This is generally a good solution when every faucet in the house has low water pressure. This pump is installed on the main water line that enters the house. All the water that comes in the house will pass through this booster, and the booster will increase the pressure of the water.

According to This Old House, a pressure booster costs around $1,200 for the device, but you will pay around $500 to $700 more for installation.

If you would like to find out why the water pressure in your house is so low, call a plumber. A plumber will evaluate your home and will determine where the problem is. After that, the plumber will fix the issue, and this will help you have water pressure that is sufficient for your needs. Contact a plumber today to find out more about why your water pressure may be low.

Share